| |
 |
Hwan-il YOO
B.S.(2008) Electrical Engineering & Computer Science, Sung Kyun Kwan Univ.
M.S.(2010) Bio and Brain Engineering, KAIST
M.S. Thesis: Capture and Release of Rare-cells from Whole Blood based on the Size and Deformability in Tapered Slit Arrays
|
| |
|
|
| |
 |
Hye-jin JIN
B.S.(2007) Bio and Brain Engineering, KAIST
M.S.(2009) Bio and Brain Engineering, KAIST
M.S. Thesis: A Multicellular Spheroid Formation and Extraction Chip Using Removable Cell Trapping Barrier
|
| |
|
|
| |
 |
Dae Geon Seo
B.S.(2006) Mechanical Engineering, YeungNam Univ.
M.S.(2009) Nano Science and Technology, KAIST
M.S. Thesis: Large-displacement Electromagnetic Actuators Using the Meander Springs Partially Exposed to Magnetic Field
Present Position : Research Assistant, DNC, KAIST, Korea |
| |
|
|
| |
 |
Yoonji KIM
B.S.(2007) Electrical Engineering & Computer Science , Kyung Pook
National Univ.
M.S.(2009) Bio and Brain Engineering, KAIST
M.S. Thesis: Three-dimensional Microstructures Fabricated by Multi-step Electrochemical Aluminum-foil Etching
Present Position : Research Assistant, DNC, KAIST, Korea |
| |
|
|
| |
 |
Hyun Jung CHU
B.S.(2006) Electrical Engineering & Computer Science, Kyung Pook National Univ.
M.S.(2008) Bio and Brain Engineering, KAIST
M.S. Thesis: A Two-dimensional Particle Focusing Channel using the Positive Dielectrophoresis (pDEP) Guided by a Dielectric Structure between Two Planar Electrodes
Present Position : Hynix, Korea |
| |
|
|
| |
 |
Tae Yoon KIM
B.S.(2004) Mechanical Engineering, Yonsei University
M.S.(2006) BioSystems Department, KAIST
M.S. Thesis: Particle Position and Velocity Detectors Based
on Particle Transit Time across Uneven Inter-gap Electrodes
Present Position : Research Assistant, DNC, KAIST, Korea |
| |
|
|
| |
 |
Mun Cheol KIM
B.S.(2004) Electronic & Electric Engineering, Hongik University
M.S.(2006) BioSystems Department, KAIST
M.S. Thesis: High-voltage Liquid Electrolyte Microbatteries
Composed of the Serial Unit Cells Defined by Surface Tension
in Planar Fluidic Layers |
| |
|
|
| |
 |
Yun Jung HEO
B.S.(2004) Aerospace Engineering, KAIST
M.S.(2006) BioSystems Department, KAIST
M.S. Thesis: Micromechanical Active Amplifiers Using the Mechanical
Resonance Modulated by Motion-dependent Stiffness
Present Position : Ph.D. Student, Tokyo University, Japan |
| |
|
|
| |
 |
Sechan YOUN
B.S.(2003) Mechanical Engineering, KAIST
M.S.(2005) BioSystems Department, KAIST
M.S. Thesis: Cell Deformability Monitoring Chips Based on Orifice
Length Dependent Lysis Rates
Present Position : Research Engineer, DNC, KAIST, Korea |
| |
|
|
| |
 |
Jae Yong LEE
B.S.(2003) Electrical Engineering, KAIST
M.S.(2005) BioSystems Department, KAIST
M.S. Thesis: Serial Digital Actuators for Low-voltage and Wide-range
Displacement Control
Present Position : Researcher, LG Electronics, Korea |
| |
|
|
| |
 |
Won Han
B.S.(2003) Mechanical Engineering, Hanyang Univ.
Present Position : Research Engineer, DNC, KAIST, Korea |
| |
|
|
| |
 |
Dong Woo Lee
B.S.(2002) Mechanical Engineering, Pusan National Univ.
M.S.(2004) Department of BioSystems, KAIST
M.S. Thesis: An Automatic Cell Counter Using Double Electrical
Sensing Zones and Control Volume
Present Position : Research Engineer, DNC, KAIST, Korea |
| |
|
|
| |
 |
Sang Do Suk
B.S.(1999) Mechanical Engineering, KAIST
M.S. (2004) Department of BioSystems, KAIST
M.S. Thesis: Microelectrofluidic Benches for Modular Fluidic
and Electrical Interconnections
Present Position : Ph.D. Student, Stanford University, U.S.A. |
| |
|
|
| |
 |
Chang Han Je
B.S.(2002) Mechanical Engineering, Yonsei Univ.
M.S.(2004) Mechanical Engineering, KAIST
M.S. Thesis: Effective Heater-Size and Droplet-Volume Adjustable
Microinjectors
Using the Digital Combination of Multiple Current Paths in a
Single Heater
Present Position : Researcher, ETRI & Research Assistant, DNC, KAIST, Korea |
| |
|
|
| |
 |
Il DOH
B.S.(2002) Mechanical Engineering, Ajou Univ.
M.S.(2003) Mechanical Engineering, KAIST
M.S. Thesis: Continuous Cell Separation Chips Using Differential
Dielectrophoretic Affinity
Present Position : Research Engineer, DNC, KAIST, Korea |
| |
|
|
| |
 |
Sunghwan CHANG
B.S.(2001) Mechanical Engineering, Postech.
M.S.(2002) Mechanical Engineering, KAIST
M.S. Thesis: Static Chaos Microfluid Mixers using Microblock-induced
Alternating
Whirl and Microblock-induced Lamination
Present Position : Researcher, Korea Institute of Machinery & Materials, Korea |
| |
|
|
| |
 |
Sang-Hee YOON
B.S.(2001) Mechanical Design & Production Engineering, Yonsei
Univ.
M.S.(2002) Mechanical Engineering, KAIST
M.S. Thesis: High Accuracy Microflow Controllers using Fluidic
Digital-to-Analog
Converters
Present Position : Ph.D. Student, UC Berkeley, Korea |
| |
|
|
| |
 |
Seungwoo LEE
B.S.(2001) Mechanical Engineering, Pusan National Univ.
Interest: MOEMS, Microactuators
Present Position : Researcher, Korea Register of Shipping, Korea |
| |
|
|
| |
 |
Soyeon YI
B.S.(2001) Mechanical Engineering, KAIST
M.S.(2002) Mechanical Engineering, KAIST
M.S. Thesis: Extraction of DNA Molecules using Crossed Field
Electrophoresis in
Micropillar Array
Present Position : Researcher, Korea Aerospace Research Institute, Korea |
| |
|
|
| |
 |
Seong-A KIM
B.S. (1999) Mechanical Engineering, KAIST
M.S. (2002) Mechanical Engineering, KAIST
M.S. Thesis: Characterization of Closed-loop Solder-line Bonding
for Hermetic MEMS
Packaging
Present Position : LG Electronics Institute of Technology, Korea |
| |
|
|
| |
 |
Sung Jin KIM
B.S. (2000) Mechanical Engineering, Seoul National Univ.
M.S. (2002) Mechanical Engineering, KAIST
M.S. Thesis: Piezoelectrically Driven Single- and Dual-axis
Rotational Micromirrors for
Large Angular Motion
Present Position : Ph.D. Student, Univ. of Michigan Ann Arbor, U.S.A. |
| |
|
|
| |
 |
Won Chul LEE
B.S. (1999) Mechanical Engineering, KAIST
M.S. (2001) Mechanical Engineering, KAIST
M.S. Thesis: Experimental Characterization of Linearly and Nonlinearly
Modulated
Digital Microactuators for High-Precision Nano-Positioning
Present Position : Researcher, Berkeley Sensor & Actuator Center, UC Berkeley, U.S.A. |
| |
|
|
| |
 |
Sang-Wook KIM
B.S. (1998) Mechanical Engineering, Inha University
M.S. (2001) Mechanical Engineering, KAIST
M.S. Thesis: Design, Fabrication and Testing of a High-Impulse,
Low-Power
Microthruster using Liquid Propellant with High Viscous Fluid
Plug
Present Position : Samsung Electro-Mechanics, Korea |
| |
|
|
| |
 |
Young Hyun JIN
B.S. (1998) Mechanical Engineering, KAIST
M.S. (2000) Mechanical Engineering, KAIST
M.S. Thesis: Design, Fabrication and Test of a Micromirror Actuator
for Integrated
Optical Microswitch Applications
Present Position : Researcher, IMTEK, Germany |
| |
|
|
| |
 |
Young Ho SEO
B.S. (1998) Mechanical Design Engineering, Pusan National University
M.S. (2000) Mechanical Engineering, KAIST
M.S. Thesis: Design, Fabrication and Characterization of a New
Magnetic Sensor based
on Plasma Hall Effect
Present Position : Professor, Kangwon National University, Korea |
| |
|
|
| |
 |
Moo Jin CHOI
B.S. (1997) Mechanical Design Engineering, Pusan National University
M.S. (2000) Mechanical Engineering, KAIST
M.S. Thesis: Characterization of the Optical Loss in a Mechanically
Deflected Free-
Standing Polymer Waveguide
Present Position : Busan Port Authority, Korea |
| |
|
|
| |
 |
Ji Chul RYU
B.S. (1997) Mechanical Engineering, KAIST
M.S. (1999) Mechanical Engineering, KAIST
M.S. Thesis: Electromagnetic Microactuators with the Electroplated
Planar Coils Driven
by Radial Magnetic Field
Present Position : Ph.D. Student, Univ. of Delaware, U.S.A. |
| |
|
|
| |
 |
Young Ho LEE
B.S. (1996) Mechanical Engineering, KAIST
M.S. (1999) Mechanical Engineering, KAIST
M.S. Thesis: Characterization of Dynamic Flow in a Microdiffuser
Present Position : KTB network, Korea |
| |
|
|
| |
 |
Eung Sam KIM
B.S. (1996) Mechanical Engineering, KAIST
M.S. (1998) Mechanical Engineering, KAIST
M.S. Thesis: Measurement and Characterization of Viscous Damping
in Micromechanical Dynamic Structures
Present Position : POSTECH, Korea |
| |
|
|
| |
 |
Myeong-Jin KIM
B.S. (1989) Mechanical Engineering, Yonsei University
M.S. (1998) Mechanical Engineering, KAIST
M.S. Thesis: Micromechanical Characterization and Initial Deflection
Minimization for
Piezoelectric Multi-Layer Cantilever Microactuators
Present Position : LG CNS, Korea |
| |
|
|
| |
 |
Jong Pal KIM
B.S. (1995) Mechanical Engineering, Korea University
M.S. (1997) Mechanical Engineering, KAIST
M.S. Thesis: A Surface-micromachined Capacitive Microaccelerometer
Present Position : Samsung Advanced Institute of Technology, Korea |
| |
|
|
| |
 |
Si Young KIM
B.S. (1995) Mechanical Design, Chungang University
M.S. (1997) Mechanical Engineering, KAIST
M.S. Thesis: Design, Fabrication and Static Test of a Resonant
Microaccelerometer
Present Position : LG CNS, Korea |
| |
|
|
| |
 |
Tae Goo KANG
B.S. (1995) Mechanical Engineering, KAIST
M.S. (1997) Mechanical Engineering, KAIST
M.S. Thesis: A Long-Stroke Thermopneumatic Microactuator
Present Position : Researcher, Institute of Microelectronics, Singapore |
| |
|
|
| |
 |
Kyoung-Sun SEO
B.S. (1994) Mechanical Engineering, KAIST
M.S. (1996) Mechanical Engineering, KAIST
M.S. Thesis: Development of Electrostatically-Driven Vertical
Micro Mirrors Using
Anisotropic Silicon Etching
|
